The quality, performance and features of these instruments, including the high definition colour LCD display and various remote communication interfaces, make these spectrum analysers highly versatile – Ideal for various environments such as R&D laboratories, education, manufacturing and the home-lab of the electronics enthusiast.Ī Rigol DSA800 series spectrum analyser, Rigol S1210 EMI pre-compliance test PC software and the TEKBOX range of EMC pre-compliance test equipment (near-field probes, LISNs and TEM cells) form a powerful and affordable system for EMC pre-compliance tests – An effective de-risking strategy, potentially saving a small fortune and project delays due to re-tests at an EMC Test House.Ĭhoose a Rigol DSA800 spectrum analyser with built-in tracking generator and you’ll have the capability of making (forward and reverse) transmission measurements (e.g. The Rigol DSA800 series of spectrum analysers are small, light weight, easy to use and great value for money. Although you do need to have firmware 00.01.07 or earlier installed to use the Keygen successfully.The DSA815-TG has a frequency range of 9kHz to 1.5GHz and a Minimum Resolution Bandwidth of 10Hz. B, because even if the Options had expired, you would be able to get them back with the Keygen. You are very lucky to have an older unit with Boot Loader 00.01.02 or 00.01.03. Note: Just so you know - you will NOT loose any of the Options you added using the Keygen later by installing the newer firmware.
RIGOL DSA815 KEYGEN LICENSE
Edit: In the last sentence of first paragraph I changed - From: ''firmware info' To: ' Option License info'. Ted PS: This only works on units with Boot Loader 01.02, or 01.0. If you have questions or a problem send me a PM.
RIGOL DSA815 KEYGEN INSTALL
If all is Ok, then go ahead and install the latest firmware (00.01.19.00.03). If all is OK and you have the older firmware installed, then use the Keygen to add what you wand (e.g. When the installation is done (be very sure it is done) remove the Pen drive and reboot the DSA815.
Now turn ON the DSA815, watch the screen closely and follow the prompts on the screen to boot from this USB Pen drive. To downgrade your firmware add the 00.01.07 or earlier firmware to the root directory of a clean USB Pen drive and insert it in the DSA815 (with it OFF) front panel USB connector. You just want one lone long string of characters. When you install the License codes for the options do NOT use any 'hyphens' (-) or 'spaces' between characters. option you will just add un-necessary garbage in your firmware (it will work Ok, but you will see tracks of it when you check your Option License info). Tracking Generator isn't needed if you have a DSA815-TG, so if you install the 10 Hz RBW or Tracking Gen.
You don't need to install all the individual firmware, just go to the latest and you will get 10 Hz RBW automatically. Do NOT install the Tracking Generator option, or the 10 Hz RBW option. Hello VE7XDT: Downgrade your firmware to 00.01.07, or previous, then use the Keygen and it will work on your unit.
0 kommentar(er)
